Illustration of the Seeed Wio Tracker L1 (OLED; Lite and E-Ink variants): dev board, oled screen, GPS.nRF52

Illustration, not a product photo.

Seeed Studio · Dev board

Seeed Wio Tracker L1

Low-power GPS board with solar input; Meshtastic community favorite.

Meshtastic: officially supportedMeshCore: supported
Price not listedList price on seeedstudio.com, checked November 1, 2026

At a glance

Battery
Not included
GPS
Yes
Screen
OLED
Water resistance
Not listed
Chip
nRF52840 (low power)
List price
Not listed

Strengths

  • GPS built in for sharing your position
  • nRF52840 chip, which Meshtastic says uses less power than ESP32 boards
  • Runs either Meshtastic or MeshCore

Trade-offs

  • No battery included; check the connector before buying one
  • Price not listed by the maker when we checked

Based on published specs, not hands-on testing.

Specifications

TypeDev board / tracker
ProcessornRF52840
LoRa radioSX1262
US 915 MHz versionYes (862-930 MHz (Meshtastic and Seeed).)
ScreenOLED 1.3 in (L1); E-ink 2.13 in (L1 E-Ink); none (L1 Lite)
KeyboardNo
GPSYes (L76K multi-GNSS.)
BatteryBattery connector for 3.7 V Li-ion (none integrated on bare L1)
Solar inputYes (Solar panel connector; triple power input USB-C / solar / Li-ion.)
Wi-FiNo
BluetoothBLE 5.0
Water resistanceNot listed
List priceNot listed (Seeed product page did not display a price when fetched.)

Checked November 1, 2026. "Not listed" means the maker and official docs don't state it.

Similar devices

Compare Seeed Wio Tracker L1 with Heltec WiFi LoRa 32 V3 / V3.1 and Heltec WiFi LoRa 32 V4

Sources

  1. meshtastic.org/docs/hardware/devices/seeed-studio/wio-series/tracker-l1/
  2. meshtastic.org/docs/hardware/devices/
  3. seeedstudio.com/Wio-Tracker-L1-p-6453.html
  4. github.com/meshcore-dev/flasher.meshcore.io/blob/main/config.json
  5. github.com/meshcore-dev/MeshCore/tree/main/variants
  6. wiki.seeedstudio.com/wio_tracker_l1_node/

Spotted an error? Send a correction.