Illustration of the LILYGO T-Deck: handheld with keyboard, color screen, keyboard.

Illustration, not a product photo.

LILYGO · Handheld with keyboard

LILYGO T-Deck

Phone-free messaging with a physical keyboard and touchscreen.

Meshtastic: officially supportedMeshCore: supported
From $46.52List price on lilygo.cc, checked November 1, 2026

At a glance

Battery
Not included
GPS
No
Screen
Color
Water resistance
Not listed
Chip
ESP32-S3 (Wi-Fi)
List price
From $46.52

Strengths

  • Physical keyboard: send messages without a phone
  • ESP32-S3 with Wi-Fi, needed for features like MQTT over Wi-Fi
  • Runs either Meshtastic or MeshCore

Trade-offs

  • No battery included; check the connector before buying one
  • No GPS
  • ESP32 boards draw more power than nRF52 boards, per Meshtastic docs

Based on published specs, not hands-on testing.

Specifications

TypeHandheld (keyboard + trackball)
ProcessorESP32-S3 (ESP32-S3FN16R8 per device page and LILYGO; ESP32-C3 handles keyboard)
LoRa radioSX1262
US 915 MHz versionYes (915 MHz variant on lilygo.cc (also a no-LoRa version).)
ScreenTFT IPS LCD 2.8 in (320x240) touchscreen
KeyboardYes
GPSNo (Meshtastic index: GPS NO; not listed on lilygo.cc.)
BatteryNone included (lilygo.cc box contents list no battery; connector type not specified)
Solar inputNot listed
Wi-FiYes, 2.4 GHz
BluetoothBluetooth 5 (LE)
Water resistanceNot listed
List price$46.52 (lilygo.cc; page showed 'Sold out' when checked; page metadata showed 43.08.)

Checked November 1, 2026. "Not listed" means the maker and official docs don't state it.

Known issues and cautions

From the maker's documentation and the official Meshtastic docs.

  • Meshtastic docs: do not proceed unless an antenna is connected.
  • Meshtastic docs: keyboard shortcuts apply to Base UI only; under MUI most modifier shortcuts are unavailable.

Where sources disagree

  • MCU: Meshtastic devices index table says ESP32-S3FN8; Meshtastic T-Deck page and lilygo.cc say ESP32-S3FN16R8.
  • Battery: lilygo.cc box contents list no battery, while LILYGO's hardware docs list a 2000 mAh capacity (likely the intended cell).

Similar devices

Compare LILYGO T-Deck with LILYGO T-Deck Plus and LILYGO T-Lora Pager

Sources

  1. meshtastic.org/docs/hardware/devices/lilygo/tdeck/
  2. meshtastic.org/docs/hardware/devices/
  3. lilygo.cc/products/t-deck
  4. github.com/meshcore-dev/flasher.meshcore.io/blob/main/config.json
  5. github.com/Xinyuan-LilyGO/LilyGoLib/blob/master/docs/hardware/lilygo-t-deck.md

Spotted an error? Send a correction.