Illustration of the Heltec MeshPocket: handheld, e-ink screen.

Illustration, not a product photo.

Heltec Automation · Handheld

Heltec MeshPocket

Phone-companion node that doubles as a magnetic power bank; long battery life, no GPS.

Meshtastic: officially supportedMeshCore: supported
From $49.00List price on heltec.org, checked November 1, 2026

At a glance

Battery
5,000 mAh
GPS
No
Screen
E-ink
Water resistance
Not listed
Chip
nRF52840 (low power)
List price
From $49.00

Strengths

  • Built-in 5,000 mAh battery
  • nRF52840 chip, which Meshtastic says uses less power than ESP32 boards
  • Runs either Meshtastic or MeshCore

Trade-offs

  • No GPS

Based on published specs, not hands-on testing.

Specifications

TypeHandheld (power-bank style with Qi2 magnetic wireless charging)
ProcessornRF52840
LoRa radioSX1262
US 915 MHz versionYes (902-928 MHz band option on heltec.org.)
ScreenE-ink 2.13 in
KeyboardNo
GPSNo (Meshtastic devices index lists GPS: NO.)
BatteryBuilt-in 5000 mAh or 10000 mAh (two versions)
Solar inputNot stated.
Wi-FiNo
BluetoothBluetooth 5.0
Water resistanceNone (Heltec FAQ: 'currently does not have waterproof features')
List price$49.00–$59.00 (heltec.org range covering 5000/10000 mAh versions.)

Checked November 1, 2026. "Not listed" means the maker and official docs don't state it.

Known issues and cautions

From the maker's documentation and the official Meshtastic docs.

  • Meshtastic docs: USB-C port is only for charging; it does not support data transfer or firmware flashing. Flash via the included magnetic pogo-pin cable.
  • heltec.org: charge at least once every three months.

Where sources disagree

  • heltec.org spec table thickness '11.50 (17.00) mm' vs FAQ 12 mm / 18 mm.

Similar devices

Compare Heltec MeshPocket with LILYGO T-Beam Supreme and LILYGO T-Echo

Sources

  1. meshtastic.org/docs/hardware/devices/heltec-automation/meshpocket/
  2. meshtastic.org/docs/hardware/devices/
  3. heltec.org/project/meshpocket/
  4. github.com/meshcore-dev/flasher.meshcore.io/blob/main/config.json

Spotted an error? Send a correction.